Page 1 of 1

Adding a 3d border around a page

Posted: Tue Sep 04, 2007 9:43 am
by davey C
Hi

This is my first post, and I've not been able to find a similar topic, but I apologise if this is often asked:

I would like to put a 3d border around a page in Netobjects Fusion. How can I go about doing this? Its quite common these days and my current client wants this type of feature.

I had a look at EZround, but it doesn't easily allow for a border around a whole page.

I did find one tutorial (http://www.fusedocs.com/index.cfm?act=sol&id=468) that allowed a solid line around the outside of a page, but wold like a more complex border

Thanks

Davey

Re: Adding a 3d border around a page

Posted: Tue Sep 04, 2007 6:35 pm
by admin
Hi

This is my first post, and I've not been able to find a similar topic, but I apologise if this is often asked:

I would like to put a 3d border around a page in Netobjects Fusion. How can I go about doing this? Its quite common these days and my current client wants this type of feature.

I had a look at EZround, but it doesn't easily allow for a border around a whole page.

I did find one tutorial (http://www.fusedocs.com/index.cfm?act=sol&id=468) that allowed a solid line around the outside of a page, but wold like a more complex border

Thanks

Davey
Do you have an example of a site with what you're trying to accomplish with a border?

What do you mean by a "complex" border?

Admin Chuck

Posted: Thu Sep 06, 2007 11:06 am
by davey C
Hi Chuck,

I will try and find an example website - but basically, I wanted the types of borders that EZROUND allows, but around the edge of the entire website - kinda like combining it with the line around the web page shown in the tutorial here (http://www.fusedocs.com/index.cfm?act=sol&id=468).

Davey

Posted: Thu Sep 06, 2007 1:46 pm
by admin
Hi Chuck,

I will try and find an example website - but basically, I wanted the types of borders that EZROUND allows, but around the edge of the entire website - kinda like combining it with the line around the web page shown in the tutorial here (http://www.fusedocs.com/index.cfm?act=sol&id=468).

Davey
EZRound creates graphics for surrounding a table with a border of your design.

If you want something fancy, your only option is graphics.

If you just want a 3d effect, like a black line on the right and bottom and a lighter grey on the left and top borders, you can do that easily with CSS borders in Fusion.

The main BeyondFusion site uses this technique. Same color border all the way around, but could just easily have a different color on each edge.

Chuck

Posted: Thu Sep 27, 2007 6:11 am
by davey C
Hi Chuck

Thanks for the advice. I've been struggling with CSS borders in Netobjects Fusion. Is there anywhere that points to a tutorial or would I be better off buying CSS for dummies?

Davey